Introduction


What is Power Fusion?

PF: Fuel Additives

"Power On Demand"

where Mileage, Efficiency and Power go hand-in-hand

(Suitable for Petrol & Diesel)

(Ideal for both fuel injected and carbureted systems)


1) Maximum
Fuel Economy
(For those who are looking for Better Fuel Consumption)
- Gives Better FC
- Generate some extra Power


2) Maximum
Power Gain
(For those who are hungry for Power)
- Generate Good Power(low-end and mid-range)
- Gives some FC


POWER Via Fuel Consumption:FC!!!

When you have more Power, FC will suffer.
When you have better FC, there is a lack of Power.
It is like a see-saw effect. Power up FC down OR Power down FC up.

But NOTwith Power Fusion, both Maximum Fuel Economy and Maximum Power Gain can give more Power and Better FC at the same time.


- Promotes smooth acceleration
- Increases horsepower (low-end and mid-range)
- Improves fuel consumption
- Give more power during HOT DAY
- Reduces exhaust emissions
- Absorbs water (if any) in fuel tank


Dosage:

- 50ml to 180ml treats 40 litres.

- 1st dosage is 100ml for 40 litres. Adjust the dosage according to the amount of fuel that you are going to treat.
- 2nd and subsequence dosage use 50ml.
- If there is a drop in fuel consumption, lower the dosage to get optimize result.

Disclaimer: The information on this site is for product price listing purposes only. Lubeszone LLP and content licensors assume no liability for any inaccurate, delayed or incomplete information, nor for any actions taken in reliance thereon. The information contained about each individual and firm has been supplied by such individual or firm without verification by us.